Although there are many details about choosing the right ring are available, just a little less about taking care of it and cleaning your engagement ring safely in your house, this article contains the details for you on how to clean an engagement ring.
Diamonds may be one of the Earth’s most tough natural materials, but careful attention is needed to keep them bright and have their luster lasting forever. In addition, you’re going to get it dirty if you wear your ring every day. Hand lotions, hair sprays, or make-up, for instance, can make the diamond ring look messy. Wondering what the reason is? It’s easy. Because the sparkle of a diamond comes from the light which enters the diamond and comes back to the eye, the light will not pass through it if it is dusty.
This guide covers all you need to know about cleaning up your engagement ring in your home safely, including diamond rings, platinum, and rings of white gold.
1. CHECK IF THE RING IS IN GOOD CONDITION
You must look closely and check the condition before you start cleaning your engagement ring. Is the gem in the proper place? Or do the diamonds move in their configuration? In that case, we suggest that you take the ring directly to a jeweler who can clean it without further damage to the ring. Experts clean it well and resolve configuration-related issues.
2. START TO CLEAN THE RING WITH LIQUID
Rings get filthy for different reasons, the most common being the frequent use of cosmetics. Lotion and even perfume may make your ring look dull. To make the diamond come back to life and clean your engagement ring apply the liquid wash and let the diamond ring soak for 20-40 minutes with hot water so that the impurities swell up and it becomes easier to clean it. In addition, leave it undisturbed while soaking.
3. USE A GENTLE TOOTHBRUSH TO CLEAN THE RING
Clean with a gentle bristled toothbrush so that there isn’t even a little bit of scratch. Ideally, any brush with no rubber bristles would be the easiest to do with. Also, children’s toothbrushes have an idle softness for work like this. They are suitable for use with diamond rings for brushing.
Keep this toothbrush aside and use it just to clean your jewelry because then it will remain soft and usable for a long. Make sure the lower part of the diamond is brushed as a lot of dirt can build up at the base of the diamond ring.
4. RINSE THE RING UNDER RUNNING WATER
Regularly scrub under slow, running water to clean your engagement ring because this will not allow a lot of dirt to settle on the band. Beware! The ring may fall down the drain. No worries. Bring the plugin. Do this regularly so that you have no dirt build-up.
5. SAFELY DRY THE RING
You should use a cotton or linen cloth to dry your ring. Those materials are much softer and not like those nasty paper towels that scratch the metal. Ideally, your diamond ring can also dry in the air.
6. POLISH THE RING
Who doesn’t like that shine? You should brush your platinum and white gold ring if you have a polishing cloth to brighten it. However, do not forget to store it in a stitching bag to prevent dust from falling on it. Also, if you do not have the cloth, consider buying one or get it done by a jeweler.
7. DON’T DO THIS WHILE CLEANING YOUR ENGAGEMENT RINGS IF IT IS DIAMOND!
We have found that some techniques on the Internet are too abrasive and potentially damage the ring. You need to be careful to avoid this. Avoid doing the following with your piece of jewelry:
Harmful strategies for ring cleansers:
The use of chlorine bleaches, abrasives, or acetones on diamond jewelry is not good because they may react with both the stone and the metal, resulting in loss of shine. Avoid using these harmful cleaners to protect them from damage.
While this product helps remove encrusted debris from a diamond ring, it is potentially harmful because it uses vibrations to clean. They use cavitation bubbles caused by low-frequency sound waves, which may damage the ring.
We hope this article gave you the information you were looking for to clean your much-loved engagement ring.